The ZebraLight H60w is a high performance solid aluminum headlamp.
The ZebraLight H60w is a high performance solid aluminum headlamp. Powered with one 18650 battery, the H60w can produce a maximum of 156 lumens out the front (torch lumens) with a smooth flood beam and and can run continuously for 26 days on its lowest output level. The H60w can be used as a headlamp as well as a task light with supplied accessories.
Main Features and Specifications
LED: Cree XLamp XR-E Q3-5A
3 modes, each can be set to one of the two levels for that mode
High: 156 lm (2 hrs) or 91 lm (4 hrs)
Med: 37 lm (10 hrs) or 12 lm (50 hrs)
Low: 0.4 lm (26 days) or 2.5 lm (9 days)
Low and Med settings are memorized. Factory default settings are 91lm, 12lm, and 2.5lm. All outputs are out-the-front (torch lumens) figures. Tested with Panasonic 2550 mAh 18650 batteries.
Battery: one 18650 size rechargeable within the 2.5v to 4.5v range, including 3.6v/3.7v Li-ion or 3.0v LiFeP04 chemistries. Works with batteries that have flat positive terminals while still maintaining reverse polarity protection.
Out of the six levels, four (190lm, 110lm, 15lm, and 3lm) are current regulated and two (45lm and 0.5lm) are PWM derived.
Electrically conductive aluminum body provides inherent EMI/RFI shielding characteristics
Standby current: <1 μA
Dimensions
Length 91mm (3.6 inch)
Diameter (body) 21.5 mm (0.85 inch)
Diameter (head and tail) 23.5 mm (0.92 inch)
80 degree flood beam, without a hotspot.
Operations
From Off
Press and hold to cycle through Low, Med and High, release to set.
Click to High, click again quickly to cycle through Med, Low and High.
When On
Click to Off.
Press and hold to cycle through Low, Med and High, release to set.
Double click to toggle between the two levels for that mode.
Waterproof
Meets IP68 in accordance with IEC 60529
Dust-tight
Protected against continuous immersion (1meter, >30 minutes)
Accessories in the package
One black silicone holder with headband
Pocket clip, can be put on or removed without any tools
Sign In
